Keyboard for the hallway

Keys misplaced? With our keyboard, you always have your keys at hand and you never have to call the key service again.

Many keys are lost every day. So that you don’t despair at home while searching, you should ensure a fixed place. Our keyboard with storage brings order to chaos. In addition, sunglasses, smartphones and wallets can be stored clearly.


Materials and tools for the keyboard:

  • 3 x OSB plate: 15 mm x 36 x 30 cm (have it sawn in the DIY store)
  • Screws 3.5 x 35 mm, e.g. from SPAX
  • Lens head screws and drills, plugs for wall mounting
  • 2 screw hooks 40 x 3.0 mm
  • Inch stick, pencil, wooden strip
  • Senker
  • Corner tensioners, e.g. from Wolfcraft
  • Grinding block with 120 sanding paper
  • Clear lacquer for furniture,semi-gloss, e.g. by Alpina
  • Colour tray, foam roll, roller holder
  • Force
  • Jigsaw, e.g. PST 700 ReadyToSaw from Bosch
  • Cordless impact drill with 4 mm wood drill, e.g. UniversalImpact 18 from Bosch
  • Multi-grinder with 150 and 220 sanding paper

Tip for surface design

You can also use coated wood – then the surface treatment can be dispensed with. You can also paint the triangles, picken them or paint them in a strong hue. Beautiful accents can also be set with geometric patterns.

Cutting wooden panels

You need 3 triangles per element. Start with the bottom/lid (A): Draw a length of 30 cm on two straight edges and connect these markings diagonally with the help of a bar and pencil. Then securely fix and saw the plate with a screw clamp. Then the two triangular sides are cut. Here it is important that you plan the material thickness (15 mm) of the floor, which is between the side parts. For the second part (C) please note the additional material thickness of the first side part(see drawing).

You also build the second element as described.

Preparing triangles

Mark 4 holes with a pencil on the bottom edge.

Important: The front borehole at the triangular tip should be at least 5 cm away from the outer edge. Then drill with the 4 mm wood drill and lower the screw holes from the back.

Manufacture key slots

Now you draw on the lid (A) the positions of the slots at equal distances (here: 8 cm). Then saw them about 2 cm deep and 4 mm wide. Finally, smooth the surfaces, edges and slots and carefully remove dust.

Painting surfaces

For protection, you apply the clear coat with a foam roll. Carefully paint both sides and the visible edges. After drying and an intermediate sanding with 220 sanding paper, you paint a second time. Then allow to dry well.

Assemble and hang triangles

With the help of the corner tensioners, you now connect the individual components. Make sure the edges are flush. Then screw in. For the suspension, you drill two holes per triangle with a 4 mm wood drill into the sides. Then transfer the holes to the wall, drill, insert dowels and tighten the top triangle. The second triangle is mounted with a distance of about 30 cm mirrored under the first triangle on the wall. Finally, you tighten the two hooks, e.g. for pockets under the shelf.

Manufacture keyfobs

With the key fobs, there are no limits to your imagination. We pulled a 20 cm long, solid cord through thick, colored wooden balls and knotted it with a key ring. You can also paint small tree slices with geometric patterns or cut wood remnants into geometric shapes and color them.

Did you like this article?

Then let everyone know where to find out where the best tips & tricks are for DIY, self-making and gardening!